Drive to Survive
Drive to Survive
Safety Resources

Site Navigation

Newsletter Signup


 
 

Web Counters
Website Visitors
Since
February 11, 2014
1,085,215
Visitors Today
Oct 11, 2024
944
You're in Charge of Driver Training - Now What...?
Email Print RSS Facebook Twitter RSS

By Member Christopher Daly
February 1, 2022

You’re in Charge of Driver Training…Now What?

Congratulations! You have just been put in charge of driver training for your entire fire department. No worries, it’s not like fire apparatus crashes are one of the greatest liabilities a fire department may ever face, often paying out millions of dollars for a lawsuit. And it’s not like you will be called to testify in a courtroom so you can tell a judge or jury how you train your drivers…or more importantly, how you don’t train your drivers. Wait, you WILL be called to testify about your driver training program? Yikes. That’s a huge responsibility.

It is one thing to be in charge of training for fireground operations. Pulling hose, throwing ladders, and cutting roofs, are all very important fireground tasks. However, these tasks, or failure to properly accomplish these tasks, rarely result in a lawsuit. If there is an incident in which someone is hurt during one of these activities, the injury is usually confined to someone on the fireground. And while this type of incident could be tragic, the consequences are usually limited to the fire department itself. And even if a lawsuit does occur, it is rarely ever publicized or shared with the public. As such, the public relations damage to the fire department is minimized.

This is not the case for a fire apparatus crash, especially when it involves a civilian vehicle. If a fire apparatus crashes into a civilian vehicle, you can almost guarantee a long and costly lawsuit. Are there times when the civilian driver was at fault? Certainly. However, each year there are countless incidents across the country where the fire apparatus operator was the cause of the crash. When that happens, get ready for the lawyers to start pounding on your door. And when the lawyers start pounding on your door, your house and your paperwork better be in order. In addition, you better be ready to defend yourself against the press, as an emergency vehicle crash that results in injury or death to a civilian can be a public relations nightmare. So why don’t fire departments take driver training more seriously?? Your guess is as good as mine.

So how do you build a “bulletproof” driver training program? I would recommend your first step is to review the NFPA standards. I have been called as an expert witness in several emergency vehicle crash-related lawsuits throughout the country and each time I am called, the first thing I ask for are the fire department’s training records and policy manuals. The next thing I ask for are the vehicle maintenance records, but that is a discussion for a different day. What I can tell you from having been involved in several of these lawsuits is that the departments that have a DOCUMENTED NFPA compliant driver training program are almost always better suited to protect and defend themselves in a lawsuit. This is especially true if the emergency vehicle driver was NOT at fault. Imagine how it would look in a courtroom if a civilian driver pulled out in front of an emergency vehicle and caused a crash, but the brakes on the fire apparatus were out of adjustment and the fire apparatus operator had never been trained to panic stop? If this were to happen, could the other side argue that the fire truck should have been able to stop before the crash occurred, even if the civilian was the one who pulled out of a side street? Sure. Would your attorney have a much easier time defending you if the fire truck was in good working order and the fire apparatus operator had been trained on emergency braking and evasive maneuvers? Absolutely. This is why it is so important to “bulletproof” your driver training and apparatus maintenance programs as much as possible.

So where do you start? For anyone involved in the supervision or development of a driver training program, the first step I always recommend is to purchase the following NFPA standards:

• NFPA 1002—Standard for Fire Department Driver / Operator Professional Qualifications
• NFPA 1451—Standard for a Fire Service Vehicle Operations Training Program
• NFPA 1500—Standard on Fire Department Occupational Health and Safety Program
• NFPA 1911 – Standard for the Inspection, Maintenance, Testing and Retirement of In-Service Emergency Vehicles

There are other NFPA standards that may mention fire apparatus operations and fire vehicles. However, these are the standards that I immediately reference after receiving a call from an attorney to work as an expert witness in a fire apparatus crash related lawsuit. If you can build your driver training program to meet all of the points in these standards, you will have a much easier time defending your program than if you just threw something together on your own.

When designing your driver training program, it is important to combine effective classroom lectures and hands-on modules that address both low-speed precision driving, as well as emergency responses at highway speeds. Too often, I see a fire department that sets up a cone course in the parking lot simply to “check the box”. These types of programs often fail to address the important issues of vehicle dynamics, energy control, siren limitations, and the like. It is no wonder that we continue to crash fire apparatus, seriously injuring and even killing firefighters and civilians, on a routine basis.

Instructor selection is also an important component of an effective fire apparatus driver training program. Who do you typically select as your driver trainers? The guy who drives the fastest to calls and provides a “white knuckle” experience for all on-board? Or do you select the experienced driver who takes his role as a professional fire apparatus operator seriously and has little, if any, negative marks on his driving record. As you can imagine, I would highly recommend the latter. In the career world, this is often the long-term fire apparatus operator who drives professionally and carefully to calls. This driver can often be found at the beginning of his shift going over the apparatus with a fine-tooth comb. In the volunteer world, this is often the fire apparatus operator who operates a heavy vehicle as part of his “day job” and is often found lecturing the younger folks on the importance of safe driving. Being a good driver training instructor is often based on mindset. Identify those people and use them to the advantage of the fire department.

When selecting driver trainers keep in mind that NFPA 1451 states that only qualified persons should be assigned as driver trainers and these persons should, at a minimum, meet the qualifications for Instructor I, as specified in “NFPA 1041—Standard for Fire Service Instructor Professional Qualifications”. Notice that the standard does not say “certified”, it says “qualified”. The NFPA standard defines qualified as “A person who, by possession of a recognized degree, certificate, professional standing, or skill, and who, by knowledge training and experience, has demonstrated the ability to deal with problems related to the subject matter, the work, or the project.”

So who are your qualified instructors? Many fire departments struggle to find a driver training instructor “certification” course. But according to the NFPA standard, the minimum qualification is that the driver training instructor meet the NFPA 1041 standard. Are you instructors Pro-Board certified as a Fire Service Instructor? The reality is that this may be more important than a “driver training instructor certification”, as NFPA 1041 is the only qualification noted in the NFPA 1451 standard. If you are in a courtroom attempting to defend your driver training program, I would highly recommend that you be able to show that your driver training instructors meet the qualifications of NFPA 1041. Should you send them to some sort of program that further teaches them or “certifies” them to be driver training instructors? Certainly. But as I have mentioned before, also make sure you are hitting the required points in the NFPA standards.

Once you have selected your qualified instructors, you must now build your training program. What resources or lesson plans are you going to use? Do you issue your students a textbook that they can keep with them for the rest of the careers and refer back to? What type of driving exercises are you going to teach them? Will you simply set up a cone course in the back lot, or do you also require hands-on driving exercises at highway speeds? All of these are important points to consider when building your driver training program and lesson plans. Remember to document and save your lesson plans in case you are ever asked to produce them in court.

The NFPA 1002 standard provides a few hands-on exercises in the appendix. Make sure your students complete these exercises as a minimum. However, don’t limit yourself to just these exercises. Build and design courses and exercises that are specific to your district. Do you handle a lot of calls off-road? Perhaps you drive along a sandy coastline. Do you operate a unique vehicle or pull a trailer? Students should be trained on these issues ahead of time, so they don’t find themselves in a situation for which they have never been trained. When you build these courses, make sure that you document them and file them somewhere in case you are ever called upon to describe them in court or during a deposition. A drone is a great way to get an overhead photograph of the course that you can keep in your files.

Who is doing your classroom training? Do they have a grasp of vehicle dynamics? Do they understand g-force, slosh, and braking efficiency? Or do they just happen to be the instructor who drew the short straw. What resources have you provided this classroom instructor to be better able to convey these advanced concepts to the students? Perhaps you are better off finding an on-line fire apparatus vehicle dynamics course and making that part of your driver training program. Nothing says that you can’t require your student to complete an on-line class as a prerequisite and keep that certificate in their file moving into the future. Once they have completed the on-line course, your in-house instructors can handle the hands-on training.

For the hands-on training, do you just throw the students behind the wheel and wish them the best of luck? Or do you have a graduated program that starts off by learning every gauge in the driver’s cockpit, works up to cone courses in a closed off parking lot, moves to non-emergency road driving with a driver trainer, and only lets the trainee respond to emergency calls after all the previous steps are complete and even then, the trainee responds with a coach sitting next to them for the first few months.

Once your drivers are qualified and allowed to drive, what type of annual recertification will you require? NFPA 1451 states that driver must have two hands-on driver training sessions every year. I hope you are doing a lot more than that, but at least make sure you are hitting the minimum. Also remember to DOCUMENT these sessions, as you want to be able to easily present proof of training should the lawyers start knocking on your door. Every year, I teach at countless fire departments that bring me in on an annual basis as part of their driver recertification program. I am always impressed with how squared away these departments appear both in real-life and on paper.

Please understand that this was a brief article designed to make you think about how you’ve designed your driver training program. It is by no means inclusive of everything required to “bulletproof” your program. We haven’t even begun to address driver selection, driving policies, and apparatus maintenance issues. We will save those topics for another time. For some of you, all of the issues we’ve discussed are old news. And that’s great. Unfortunately, I can tell you from traveling and teaching across the country, this is not always the case. And this is why driver training is such an important topic to discuss.

In the meantime, for those who have been assigned to implement or oversee a driver training program, I highly recommend that you pick up a copy of my new textbook “Drive to Survive – The Art of Wheeling the Rig”, as we have dedicated an entire chapter to setting up an NFPA compliant driver training program (https://fireengineeringbooks.com/drive-to-survive/). Also feel free to check out the “Drive to Survive” on-line program at courses.drivetosurvive.org - Be safe!

For more information, please check out Chris’ new book “Drive to Survive – The Art of Wheeling the Rig” at Fire Engineering Books and Videos or visit his on-line courses at https://courses.drivetosurvive.org/ . Additional training videos are also available by subscribing to the “Drive to Survive” YouTube channel at https://www.youtube.com/channel/UCgye_xl3Y6NLmfIdwqkBRhQ

ABOUT THE AUTHOR: Chris Daly is a 23-year police veteran, currently serving as a Lieutenant in West Chester, PA. Chris is an accredited crash reconstructionist (ACTAR #1863) and a lead investigator for the Chester County Serious Crash Assistance Team. In addition to his police duties, Chris has served 31 years as both a career and volunteer firefighter, holding numerous positions, including the rank of Assistant Fire Chief. Chris has a master’s degree in Environmental Health Engineering from Johns Hopkins University, and is a contributing author to numerous fire service professional publications including Fire Apparatus & Emergency Equipment and Fire Engineering Magazine. Chris has also developed an emergency vehicle driver training program entitled “Drive to Survive”, which has been presented to over 24,000 firefighters and police officers at over 540 emergency service agencies across the United States. He is the author of a recently released textbook from Fire Engineering Books and Video entitled “Drive to Survive – The Art of Wheeling the Rig”. Additional resources concerning emergency vehicle crash reconstruction and seminar scheduling can be found at his website www.drivetosurvive.org

https://youtu.be/fm_7m54EJQY

 

Add a Comment Add a Comment 0 Comment(s)


Upcoming Classes
11/02/2024
Longport (NJ) Fire Department

Website Designed and Hosted By: Content Proudly Maintained By: Contact Info:
Firehouse Solutions
www.FirehouseSolutions.com
Drive to Survive
West Chester PA 19380
Emergency Dial 911
Non-Emergency: 610-960-7248
E-mail: station56@aol.com
Copyright © 2024 Firehouse Solutions (A Service of Technology Reflections, Inc.) - Website Administration